Bravo Company Usa

BCM Lower Group w/MK2RMS-M1T0 & BCMGUNFIGHTER Stock Mod-0-Flat Dark Earth - Utilizes the BCM MK2 Receiver Extension, MK2 buffer, and rifle M16 action spring. The MK2 receiver extension is...

BCM Lower Group w/BCMGUNFIGHTER Stock Mod-0-SOPMOD (Wide-body) - Black

BCM Lower Group w/MK2RMS-M1T0 & BCMGUNFIGHTER Stock Mod-0-SOPMOD (Wide-body) - Flat Dark Earth - Utilizes the BCM MK2 Receiver Extension, MK2 buffer, and rifle M16 action spring. The MK2 receiver...

BCM Lower Group w/MK2RMS-M1T0 & BCMGUNFIGHTER Stock Mod-1-SOPMOD (Compartment) - Black - Utilizes the BCM MK2 Receiver Extension, MK2 buffer, and rifle M16 action spring. The MK2 receiver extension...

Receivers Machined from Aluminum Forgings 7075-T6. Receivers Hardcoat Anodized per MIL-A-8625F, Type III, Class 2. Staked M4 Lock Nut. USGI H Buffer (1 USGI Tungsten, 2 Steel). Low Shelf for RDIAS...

Aggressive texture. Storage inside the grip. Requires three KeyMod attachment hole mounting points. Spring-loaded clamps makes installation and removal easier. Made in the U.S.A., manufactured from...

Driven by over a decade of feedback from real-world combat operations, BCM has made continual design refinements and structural improvements to the charging handle in the M4 and M16 to address the...

Featuring the same industry leading barrel nut and lock up design as originally introduced on BCM's evolutionary KMR handguard, the MCMR Series of handguards gives the shooter modularity in the M-LOK...

Available is three Lengths: 3-inch (5 slot), 4-inch (7 slot) and 5.5-inch (11 slot). Features a Snag resistant design, while retaining Mil-Standards specs. Self-contained assembly, eliminates the...

The Gun Fighter's Grip by BCM allows for a reduced angle and improved ergonomics when shooting in the modern gun fighting stances. Each grip includes both an extended modular insert to close the gap...

Featuring the same industry leading barrel nut and lock up design as originally introduced on BCM's evolutionary KMR handguard, the QRF Series of handguards gives the shooter modularity in the...

The KAG is the end result of collaboration between BCM and Travis Haley, founder of Haley Strategic Partners and inventor of multiple weapons manipulation enhancements in the firearms industry...

Like all BCM products- Made in the USA. Includes set screw and roll pin. Professional installation by a qualified gunsmith is required.

Threaded 1/2 x 28 for 5.56mm AR15 platforms. Should be installed by a qualified armorer.

Available in three Lengths: 3-inch (5 slot), 4-inch (7 slot) and 5.5-inch (11 slot). Features a Snag resistant design, while retaining Mil-Standards specs. Self-contained assembly, eliminates the...

The KAG is the end result of collaboration between BCM and Travis Haley, founder of Haley Strategic Partners and inventor of multiple weapons manipulation enhancements in the firearms industry...

Durable Aluminum construction. Intently designed to be low-profile and snag-free. Patent Pending mounting system. Minimal added weight, 0.9 oz.

Bi-directional. Locking tabs on either end, depending which direction they are installed. Measurements: Length 5.550'', Width 0.625'', Thickness 0.100''. Can be cut to any length, depending on users...

The new (United States Patent 9,709,358) BCM Direct Mount Picatinny 1913 interface system, was developed to be the most rigid, light-weight, and cost effective system available for Vertical Pistol...

Driven by over a decade of feedback from real-world combat operations, BCM has made continual design refinements and structural improvements to the charging handle in the M4 and M16 to address the...

Can be cut to any length, depending on users requirements. Made in the U.S.A. of a high-strength polymer material. Each Kit contains five panel strips.

The strongest light-weight polymer stock available for your mil-spec receiver extension. Modular VBOST (Vehicle Borne Operations Sling Tab) ‚œ This tab interfaces with the shooter's riggers' band or...

Three, six-hole KeyMod mounting surfaces (10:30, 1:30, and 6:00). Aluminum heat shield reduces heat transfer to the handguard and shooters' hand. The PKMR will only fit a triangle M16 type handguard...

BCMGUNFIGHTER Vertical Grip Mod 3, M-LOK Compatible

Stripped carrier is finished in an Ion Bonded Black. Lowers friction and cleans easier. BCM (MPI) complete bolt carrier group is fully assembled. (BCG) Bolt carrier group (auto version) for your...

2 different types of ambidextrous sling mounting options, including QD swivel sockets. Longer overall length to fit longer ''MilSpec'' diameter AR10/A5/Intermediate receiver extensions. Storage...

Aggressive texture and storage volume combined with modular design to allow improvements and adaptation in the future. Cross bolt designed to work with improvised tools (such as a quarter) and allow...

This BCM Enhanced Lower Parts Kit includes: BCM PNT Hammer Hammer Spring BCM PNT Trigger Trigger Spring Hammer/Trigger Pins Disconnector Disconnector Spring Bolt Catch Bolt Catch Plunger ...

The strongest light-weight polymer stock available for your mil-spec receiver extension. Modular VBOST (Vehicle Borne Operations Sling Tab) ‚œ This tab interfaces with the shooter's riggers' band or...

The KAG is the end result of collaboration between BCM and Travis Haley, founder of Haley Strategic Partners and inventor of multiple weapons manipulation enhancements in the firearms industry...

Made by Americans in Hartland, WI - the BCM Mod 2 stock is an improvement over the baseline M4 accessory with enhanced ergonomics, and next-level durability. Recontoured into a patented (United...

Bravo Company manufacturing has gained quite a cult like following due to the fact that BCM takes quality control to a new level. BCM is know for strict tolerances and extremely high quality control...

Driven by over a decade of feedback from real-world combat operations, BCM has made continual design refinements and structural improvements to the charging handle in the M4 and M16 to address the...

This Compensator was not designed as a gamers comp. It was designed for tactical applications to reduce muzzle rise, flash signature, noise, and lateral pressure.

Operate your semi auto AR15 or M4 selector from the right or left side of the weapon. This will work for semi auto rifles and carbines.

Carbon Steel with Manganese Phosphate Finish. For 1-1/4'' Slings.

BCM 3 inch Picatinny Rail Section, Aluminum, M-LOK Compatible

Requires two lugs and one 1913 slot to mount properly. All steel construction. Includes hex wrench. Like all BCM weapons and accessories, Made in the USA.

This kit contains all the necessary parts to mount to your Mil-Spec dimension stock assembly to your Mil-Spec lower receiver: MK2 Mod 1 - T0 Buffer (weight = approximately 3.8oz) Mil-Spec M16A4...

Made by Bravo Company MFG, Inc. (BCM) These Barreled Upper Receiver Groups are designed for shooting professionals with the Mil-Spec features for the demands of their duty. They are fully assembled,...

Made by Bravo Company MFG, Inc. with set screw mounting. Set Screws are Steel 10-32 x 3/16 Knurled Cup Point.

This kit contains all the necessary parts to mount your AR15, M16, M4 Pistol Lower Receiver. Pistol receiver extension (buffer tube).

The BCM gunfighter AR-15 QD Sling Swivel Receiver End Plate features a Quick Disconnect Sling Swivel Stud. This end plate is machined from steel and features a matte black finish. Like all BCM...

BCMGUNFIGHTER PMCR (Polymer M-LOK compatible mounting slots) 5.56, Carbine, - Black

BCMGUNFIGHTER Quick Detach Sling Swivel 1'' D-Ring (Heavy Duty)

This kit contains all the necessary parts to mount to your Mil-Spec dimension stock assembly to your Mil-Spec lower receiver: MK2 Mod 1 - T1 Buffer (weight = approximately 4.7oz) Mil-Spec M16A4...

Strong Aluminum construction. Intently designed to below-profile and snag-free.

BCMGUNFIGHTER Grip Mod 3 KD - Black

This Compensator was not designed as a gamers comp. It was designed for tactical applications to reduce muzzle rise, flash signature, noise, and lateral pressure.

This Compensator was not designed as a gamers comp. It was designed for tactical applications to reduce muzzle rise, flash signature, noise, and lateral pressure.

This Compensator was not designed as a gamers comp. It was designed for tactical applications to reduce muzzle rise, flash signature, noise, and lateral pressure.

For your AR15, M16, M4. Carbine receiver extension (buffer tube) machined from 7075T6 and manufactured to Mil-Spec dimensions and specifications. Mil-Spec receiver extensions have a slightly smaller...

8-position (360-degree), non-rotational locking interface. Requires three KeyMod attachment hole mounting points. All steel construction. Quick detach sling swivel not included. BCM US Patent Number...

The BCM Extractor Spring is a heavy coil design made for the increased extractor tension required on many AR15, M4, M16 short barreled rifles. This product also improves the reliability on a standard...

8-position (360-degree), non-rotational locking interface. All steel construction. Quick detach sling swivel not included.

An update to the classic A1 and A2 design, the BCM Mod 4 Pistol Grip employs a new form factor with a reduced angle and a new ultra-tactile grip texture that enable more exacting fire control...

This kit contains all the necessary parts to mount your Mil-Spec dimension stock assembly to your lower receiver.

Made by Bravo Company MFG, Inc. with set screw mounting. Set Screws are Steel 10-32 x 3/16 Knurled Cup Point.

With 60 years of continuous service, the AR15 has seen a number of enhancements to improve the survivability of the end user. Most critically, the introduction of the MIL-STD-1913 rail, AKA the...

Based on the SOPMOD designed bolt upgrade and rebuild package, this kit is designed to breathe new life into your bolt assembly. The bolt assembly is the heart of your AR15 rifle system and...

The A2X is an extended version of the A2 flash hider found on the M16 and M4 series of rifles. When mounted per BATF specifications for a permanent installation it will bring your 14.5 M4 barrel to a...

With 60 years of continuous service, the AR15 has seen a number of enhancements to improve the survivability of the end user. Most critically, the introduction of the MIL-STD-1913 rail, AKA the...

Intently designed to be low-profile and snag-free. Patent Pending mounting system. Minimal added weight, 0.5 oz. Compatible with: M300 MINI M600AA M600 ULTRA M600P FURY M300V MINI M600V

This Compensator was not designed as a gamers comp. It was designed for tactical applications to reduce muzzle rise, flash signature, noise, and lateral pressure.

BCM 3 inch Picatinny Rail Section, Nylon - Black, M-LOK Compatible.

The BCM Extractor Spring is a heavy coil design made for the increased extractor tension required on many AR15, M4, M16 short barreled rifles. This product also improves the reliability on a standard...

These Barreled Upper Receiver Groups are designed for shooting professionals and responsible civilians with the Mil-Spec features for the demands of their duty. They are fully assembled, headspaced,...